- Resistance to microorganisms
- Resistance to mechanical stress
- High chemical resistance
- Resistance to root penetration
- High strength and elasticity
The LOGICBASE P-PT material is used as a protective layer in waterproofing systems based on TPO membranes. High impact resistance of LOGICBASE P-PT provides reliable protection for the main waterproofing layer against damage during construction works. The material is produced on a state-of-the-art, high-tech automated line by coextrusion, which ensures the homogeneity of the product.
|Thickness, mm||1.2 1.5 2|
|Strength at maximum stress, MPa||15|
|Specific elongation when broken, %, not less than||600|
|Water absorption by weight, %, no more than||0.1|
|Bend point on R=5 mm beam, °C||-55|
|Resistance to static loading, 250 N x 24 hours||25|
Each roll is wrapped in individual, protective polyethylene film packaging.
|Membrane thickness, mm||Width x length of a roll, m||Number of rolls per pallet|
|1.2||25 x 2.1||14|
|1.5||25 x 2.1||14|
|2||20 x 2.1||14|
Rolls should be stored horizontally on pallets in their original packing, away from direct sunlight, rain, and snow. Storage in two stages using rigid spacers is allowed.
Back to the list