- Resistance to microorganisms
- High chemical resistance
- Resistance to root penetration
- Elasticity at low temperatures
- High mechanical strength
The membrane is designed for waterproofing of buildings and engineering structures. The membrane has a signal light-beige color, which helps quickly discover any damage to the waterproofing during its installation or transportation. The material is produced on a state-of-the-art, high-tech automated line by coextrusion, which ensures the homogeneity of the product.
|Thickness, mm||1.5 1.8 2|
|Strength at maximum stress, MPa||15|
|Specific elongation when broken, %, not less than||600|
|Water absorption by weight, %, no more than||0.1|
|Bend point on R=5 mm beam, °C||-55|
|Resistance to static loading, 250 N x 24 hours||25|
Each roll is wrapped in individual, protective polyethylene film packaging.
|Membrane thickness, mm||Width x length of a roll, m||Number of rolls per pallet|
|1.5||25 x 2.1||14|
|2||20 x 2.1||14|
|1.8||25 x 2.1||14|
Rolls should be stored horizontally on pallets in their original packing, away from direct sunlight, rain, and snow. Storage in two stages using rigid spacers is allowed.
Back to the list