LOGICBASE V-PT

PVC membrane for the protection of waterproofing systems.
  • Resistance to microorganisms
  • Resistance to mechanical stress
  • High chemical resistance
  • Resistance to root penetration
  • High strength and elasticity
  • Longevity

Description

LOGICBASE V-PT membrane is used in waterproofing systems based on the PVC membrane as a protective layer. High impact resistance of LOGICBASE V-PT provides reliable protection for the main waterproofing layer against damage during construction works. Good weldability of the protective membranes with the main waterproofing membrane facilitates easy fixing of the protective layer on the vertical surface of foundations and vaults of tunnels. The material is produced on a state-of-the-art, high-tech automated line by coextrusion, which ensures the homogeneity of the product.

Characteristics

Colors gray
Reinforcement Without reinforcement
Thickness, mm 1.5 2
Strength at maximum stress, MPa 12
Specific elongation when broken, %, not less than 200
Water absorption by weight, %, no more than 0.2
Bend point on R=5 mm beam, °C -40
Resistance to static loading, 250 N x 24 hours 20

Packaging

Each roll is wrapped in individual, protective polyethylene film packaging.

Membrane thickness, mm Width x length of a roll, m Number of rolls per pallet
1.5 20 x 2.05 18
2 20 x 2.05 15

Storage

Rolls should be stored horizontally on pallets in their original packing, away from direct sunlight, rain, and snow. Storage in two stages using rigid spacers is allowed.

Solution

Other membranes

Back to the list