TN-ROOF Terrace

The TN-ROOF Terrace system is designed with due account for pedestrian load requirements and is used for new construction on the roofs of modern, multifunctional complexes. The use of plastic pillars enables the laying of tiles with zero slope, reduces the weight of the roof structure, and prevents the formation of puddles on the surface of the roof.
  • High resistance to pedestrian loads
  • Protection of the membrane roofing against mechanical damage
  • A level-slope direction can be created on the roof
  • Functional roof

Description

In the TN-ROOF Terrace system, reinforced pavement tiles are laid directly on special plastic supports, and the entire roof pie is held in place due to the weight of the ballast (pavement tiles).

The advantage of the design is better protection of the waterproofing cladding from mechanical damage and UV-radiation. All this leads to longer service life and reliability of the ballast roofing system.

To create a vapor barrier, it is recommended to lay Bipol EPP bitumen/polymeric material. The material is placed loosely, and seams are welded with hot air or open flame. For roofs with more than a 10% slope, we recommend continuous gluing of the vapor barrier. The role of a vapor barrier is to protect the thermal insulation from moisture penetrating from the inside space of the building.

This system has thermal insulation based on TechnoNICOL CARBON PROF 300 extrusion foam polystyrene, which can withstand higher loads that occur in the ballast system than alternatives.

The slope is made with TECHNONICOL CARBON PROF 250 SLOPE wedge-shaped plates. This solution contributes to faster laying of the system materials, the absence of "wet processes", and economic efficiency of the construction and installation works.

The system has advanced fireproof properties: K0 (30) and RE 30, according to the opinion of FSBI VNIIPO (Fire Safety Research Institute) of the Ministry of the Russian Federation for Emergency Situations. The waterproofing layer is a LOGICROOF V-GR PVC membrane, reinforced with fiberglass, to increase the resistance of waterproofing to puncturing by the sharp edges of the ballast.

The use of TechnoNICOL polymeric membranes, supplied in rolls which have greater width and length (2.05 m x 25 m), makes it possible to install the roofing fast, while welding with special hot-air equipment ensures the high reliability and durability of welded joints.

Needle punched, heat-treated TECHNONICOL geotextile, weighing 300 g/m2 is used to protect waterproofing from damage; reinforced paving tiles are placed on top of the geotextile on special plastic supports. If it is necessary to create a zero slope on a roof which has a slope, then adjustable (screw) supports are used.

Area of application:

The TN-ROOF Terrace system is designed with due account for pedestrian load requirements and is used for new construction on the roofs of modern, multifunctional complexes. The use of plastic pillars enables the laying of tiles with zero slope, reduces the weight of the roof structure, and prevents the formation of puddles on the surface of the roof.

Polymer membranes

ECOBASE V
Unreinforced PVC membrane
LOGICBASE V-SL (LOGICROOF T-SL)
PVC membrane for the device of waterproofing of building structures and engineering structures.
LOGICROOF V-RP ARCTIC
PVC membrane, polyester reinforced with special mesh netting
TechnoNICOL telescopic hardware
TechnoNIСOL telescopic fixings, with hidden self-tapping screw heads for constructing roofs with mechanical fixing.
Induction fixing system
The induction fixings system is used for roofs located in extremely windy areas. It is an indispensable, reliable, and more cost-effective solution than the traditional system.
LOGICBASE V-ST (LOGICROOF T-PL)
PVC membrane with a textured surface for two-layer waterproofing systems.
LOGICROOF V-RP
PVC membrane reinforced with polyester mesh with improved flexibility
TechnoNICOL drill-tipped, self-tapping screw 4.8x
The drill-tipped, self-tapping screw with anti-corrosion coating is made of high-grade hardened carbon steel.
Kaliningrad Arena
<p>Kaliningrad Arena</p>
LOGICROOF V-RP White
PVC membrane with a high reflective surface, reinforced with polyester mesh of special weaving
LOGICROOF V-GR
PVC membrane reinforced with fiberglass
LOGICROOF V-GR FB
PVC membrane reinforced with fiberglass, with a fleece backing of laminated geotextile.
TechnoNICOL drill-tipped, self-tapping screw 5.5x
The drill-tipped, self-tapping screw with anti-corrosion coating is made of high-grade hardened carbon steel.
TN-ROOF Garant
TechnoNICOL pointed, self-tapping screw 4.8x
The pointed, self-tapping screw with anti-corrosion coating is made of high-grade hardened carbon steel.
LOGICROOF V-SR
Unreinforced highly elastic PVC membrane.
TN-ROOF Smart PIR
Self-tapping concrete screw, 6.3x
The special, self-tapping screws for concrete are used both for the reconstruction of roofs with ribbed plates and for new roofs.
TN-ROOF Optima
TechnoNICOL aluminum edging strip, 3000x32x3.0
The TechnoNICOL aluminum edging strip is used for fixing the edge of the roof cladding on a vertical surface.
TN-ROOF Smart
TN-ROOF Balance PIR
TN-ROOF Terrace
TechnoNICOL steel retaining strip 3000x31x1.5
The galvanized steel strip has an anticorrosion coating, which helps it to retain its aesthetic appearance. It has enhanced resistance to torsion and bending.
TN-ROOF Expert PIR
TN-ROOF Classic
ECOPLAST V-RP Siberia
Roofing PVC membrane reinforced with a polyester mesh of special weaving.
TN-ROOF Prof
Perforated tape for areas adjacent to pipes and passages
Type ___ supports with a height of 15 mm and 20 mm create a gap between the tile and the waterproofing coating, which provides for a smooth and rapid removal of water from the surface of the roof.
ECOPLAST V-RP
Roofing PVC membrane of business class, reinforced with a polyester mesh of special weaving.
LOGICBASE P-PT
TPO membrane for the protection of waterproofing systems.
LOGICBASE P-SL
TPO membrane for the device of waterproofing of building structures and engineering structures.
LOGICBASE V-PT
PVC membrane for the protection of waterproofing systems.
LOGICBASE V-ST-T
Transparent PVC membrane with a textured surface for two-layer waterproofing systems.
LOGICBASE V-T
Transparent PVC membrane for waterproofing of building structures and engineering structures.
EC-220-3
External waterstops are used for partitioning waterstop systems made with PVC membranes and for sealing the working joints during concrete works.
EC-320-4
External waterstops are used for partitioning waterstop systems made with PVC membranes and for sealing working joints during concrete works.
EM-260/20
External PVC waterstop. The waterstop is used for sealing expansion joints in the construction of buried and underground structures.
EM-260/50
External PVC waterstop. The waterstop is used for sealing expansion joints in the construction of buried and underground structures.
IC-240-2
The internal waterstop is used for sealing working joints when performing concrete works on buried and underground structures.
IC-240-6
The internal waterstop is used for sealing of working joints when performing concrete works on buried and underground structures.
IM-240/20
Internal deformational PVC waterstop. The waterstop is used for sealing expansion joints in the construction of buried and underground structures.
IM-260/50
Internal deformational PVC waterstop. The waterstop is used for sealing expansion joints in the construction of buried and underground structures.
TechnoNICOL support stand for tiles
A convenient support for the gap between the tile and the waterproofing layer. This makes it possible to remove excess water from the surface of the roof quickly and easily. The supports are highly resistant to weathering and UV radiation.
Transport and logistics complex "Yuzhnouralsky"
TN-ROOF Combi
EC-220/3 TPO
External waterstops are used for partitioning waterstop systems made with TPO membranes and for sealing working joints during concrete works.
EC-320/4 TPO
External waterstops are used for partitioning waterstop systems made with TPO membranes and for sealing working joints during concrete works.
EM-260/20 TPO
External TPO waterstop. The waterstop is used for sealing expansion joints in the construction of buried and underground structures. Used together with TPO membranes.
EM-260/50 TPO
External TPO waterstop. The waterstop is used for sealing expansion joints in the construction of buried and underground structures. Used together with TPO membranes.
Round plate-shaped holder TN Ø 50
The plate-shaped holder distributes the load on the membrane to any base. The well-considered geometry of the washer provides it with stiffness and protects the membrane from deformation under the washer. So, if you use such a holder, your membrane will be reliably secured, and you can be confident of the integrity of the membrane, and, therefore, of the roof.
TN-ROOF Combi Plus
Drill for concrete
The bore bit is designed for unreinforced and reinforced concrete.
Epoxy adhesive
TECHNONICOL two-pack epoxy adhesive is a paste-like substance of gray color. The product demonstrates excellent adhesion with most construction materials: concrete, metal, wood, etc.
PVC tape
PVC TechnoNICOL tape is a PVC tape with one side covered with polypropylene-based geotextile, the edges of which extend beyond the edges of the PVC tape.
TN-ROOF Garant Inductsia
TechnoNICOL anchor element
A polyamide anchor shield as a part of the fixing element set when placing a screed on the structure of the layer for mechanical fixing.
Straight connection branch
It is a part of the maintenance injection system and is designed for the supply of injectable material to the damaged section of the waterproofing.
Angled connection branch
It is a part of the maintenance injection system and is designed for the supply of injectable material to the damaged section of the waterproofing.
TechnoNICOL rondel
The hardware element used for mechanical fixing of LOGICBASE V-SL (LOGICROOF T-SL) geotextiles and membranes on vertical surfaces and in the vaults of tunnels.
Fittings for joints
It is used for connecting injection pipes to injection branches and for connecting injection pipes to each other.
TechnoNICOL Geotextile 300 g/m2
TechnoNICOL heat-treated needle punched geotextile is a nonwoven fabric from polypropylene fibers weighing 300 g/m2.
TechnoNICOL Geotextile 500 g/m2
TechnoNICOL heat-treated needle punched geotextile is a nonwoven fabric from polypropylene fibers, weighing 500 g/m2.
TechnoNICOL Cleaner for PVC membranes
Used to remove local contamination from PVC membranes and to prepare the surface of membranes for welding.
PLANTER Extra
Profile-shaped PLANTER membranes are a high-quality material on the basis of high density polyethylene (HDPE).
PLANTER Geo
Profile-shaped PLANTER membrane is a high-quality material based on high-density polyethylene (HDPE).
PLANTER Standard
Profile-shaped PLANTER membranes are a high-quality material on the basis of high density polyethylene (HDPE).
TechnoNICOL vapor barrier
A vapor barrier film with high elasticity and strength. It is used for constructing vapor insulation in insulated flat roof systems.
Polyethylene film 200 μm TechnoNICOL
Used to separate layers of geotextile and protective cement/sand screed.
Double-sided adhesive tape for vapor barrier structures
It is designed for gluing the laps of vapor barrier sheets.
Heat-treated PET Geotextile
Geotextile is used as a separating, reinforcing, protective, filtering, and draining material.
TechnoNICOL separation layer: fiberglass mat of 100 g/m2
Fiberglass a material made of randomly positioned monofibers, bonded together using a synthetic binder.
LOGICROOF SPRAY GUN
The gun is used to spray the glue.
LOGICROOF SPRAY Contact Adhesive
High-quality polyurethane-based adhesives for gluing roofing insulation materials.
LOGICROOF SPRAY foam adhesive
The foam adhesive is used to glue a polymeric membrane to rigid thermal insulation plates (PIR)
LOGICROOF SPRAY hose for glue gun
The rubber hose is used to feed the adhesive.
TechnoNICOL polyurethane sealant
Used for sealing the edges of waterproofing systems.
Holder for the lightning discharger wire, 75x130
Used on roofs for fixing direct lightning discharge wires and electricity drainage to the ground.
TechnoNICOL liquid PVC, gray, 1L with applicator bottle
Hides visible defects of welded seams, reduces the risk of capillary leakage by the reinforcing mesh of the membrane, and contributes to the aesthetic appearance of the welded seam.
Contact adhesive for TechnoNICOL PVC-membranes
Translucent double-sided adhesive for soft PVC. Based on nitrile rubber and synthetic resins, glues metal, wood, concrete, stone, and a number of other materials.
LOGICROOF NG fire-resistant material
The LOGICROOF NG fire-resistant material is made of flame-resistant fabric and comes supplied in rolls. It is used for creating fire prevention bafflers around skylights and smoke hatches.
LOGICROOF SelfPatch self-adhesive patch
A unique solution for temporary and urgent repairs of roofs made with PVC membranes. First aid for your roof!
TechnoNICOL Cleaner for PVC membranes
Used to remove local contamination from PVC membranes and to prepare the surface of membranes for welding.
PVC LOGICROOF Walkway Puzzle walkway, gray 0.6 x 0.6 m
The best solution for the creation of walkable paths on the surface of roofs made of PVC membranes.
Technical data sheet LOGICROOF
PVC metal, gray 1x2m
The polymeric covering on the top surface of the metal allows for welding a membrane on a metal profile, providing a tight connection.
A tester for checking the quality of the weld
Used for testing the quality of seams after welding.
Technical data sheet ECOPLAST
Prefabricated PVC passage element, 50-90 mm
A prefabricated PVC element for quick and high-quality connection to pipes on the roof made from polymeric membranes.
Prefabricated PVC passage element, 20-50 mm
A prefabricated PVC element for quick and quality connection to pillars on the roof of polymeric membranes.
TechnoNICOL PVC external angle
A prefabricated PVC external angle for quick and high-quality reinforcement of external corners.
TechnoNICOL PVC internal angle
A prefabricated PVC internal angle for quick and high-quality reinforcement of internal corners.
A-profile
A PVC profile with cross-section "A", imitating a fold.
Fire safety certificate: LOGICROOF, ECOPLAST PVC membrane
Why LOGICROOF?
Installation manual for roofing PVC membranes LOGICROOF
Waterproofing of underground structures with LOGICBASE
Technical sheet No. 7.09 TechnoNICOL waterstops
Resistance to dynamic wind forces LOGICROOF
Conformation certificate LOGICROOF
Fire classification report LOGICROOF 1,2
Fire classification report LOGICROOF 1,5
Installation manual for basement PVC membrane LOGICBASE
Determination of tensile property LOGICBASE V-SL
An Energy NT1600 set for lap joint welding
A compact and economical tool for manual welding with hot air. Ideal for installing roofing with a small surface area.
Injection pipe
The element of the injection system used for bringing the maintenance material to the injection branch.
TN-FOUNDATION Prof
TN-FOUNDATION Barrier
TN-FOUNDATION Expert
TN-FOUNDATION Prof for embedded walls
TN-FOUNDATION Barrier for embedded walls
TN-FOUNDATION Expert for embedded walls
TN-TUNNEL Barrier
TN-TUNNEL Expert
TN-TUNNEL Prof

Other solutions